Row Position Pattern (Holes1) - Siemens SINUMERIK 840D sl Operating Manual

Programming technology functions (cycles)
10.1 Drilling
Parameter Description
Peripheral surface C - at right angles
X0 Cylinder diameter ∅ (abs)
Y0 Y coordinate of 1st position (abs)
Z0 Z coordinate of 1st position (abs)
Y1 ...Y7 Y coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Z1 ...Z7 (on‐ Z coordinate for additional positions (abs or inc)
ly for ShopTurn)
Incremental dimension: The sign is also evaluated
Peripheral surface C - cylindrical
C0 C coordinate of 1st position (abs)
Z0 1st position of hole with reference to Z axis (abs)
C1 ...C7 C coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Z1 ... Z7 (on‐ Additional positions in the Z axis (abs or inc)
ly for ShopTurn)
Incremental dimension: The sign is also evaluated
Peripheral surface Y:
X0 Reference point in X direction (abs)
C0 Positioning angle for machining surface
Y0 Y coordinate of 1st position (abs)
Z0 Z coordinate of 1st position (abs)
Y1 ...Y7 Y coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Z1 ...Z7 (on‐ Z coordinate for additional positions (abs or inc)
ly for ShopTurn
Incremental dimension: The sign is also evaluated
10.1.12

Row position pattern (HOLES1)

Function
You can program any number of positions at equal distances along a line using the "Row
position pattern" function.
334
Unit
mm
mm
mm
mm
mm
Degrees
mm
Degrees
mm
mm
Degrees
mm
mm
mm
mm
Operating Manual, 05/2017, A5E40868721
Turning