Displaying Local Variable Table - Siemens SINUMERIK 840D sl Operating Manual

Edit PLC user program (828D only)
26.5 View of the program blocks
● Properties
You can display the properties of a block and edit them, when required.
● Protection
You can protect the block with a password. Then, the block cannot be opened without
entering the password.
Procedure
26.5.7.2

Displaying local variable table

You have the option of displaying the local variable table of an INT block.
The following information is listed in the tables.
Name
Variable type
Data type
Comment
864
1. Select the "Startup" operating area.
2. Press the "PLC" softkey.
3. Press the softkey:
● "Window 1 OB1"
- OR -
● "Window 2 SBRO"
4. Press the "Program block" softkey.
Freely assigned
Selection:
● IN
● IN_OUT
● OUT
● TEMP
Selection:
● BOOL
● BYTE
● WORD
● INT
● DWORD
● DINT
● REAL
Freely assigned
Operating Manual, 05/2017, A5E40868721
Turning