Siemens SINUMERIK 840D sl Operating Manual page 194

Machining the workpiece
6.17 Setting for automatic mode
References
Programming Manual Measuring Cycles / 840D sl/828D
Note
You have the option of changing the feedrate velocity in operation.
See also
Current block display (Page 43)
194
3. Press the menu forward key and the "Settings" softkey.
The "Settings for Automatic Operation" window opens.
4. In "DRY run feedrate," enter the desired dry run speed.
5. Enter the desired percentage in the "Reduced rapid traverse RG0" field.
RG0 has no effect if you do not change the specified amount of 100%.
6. Select the required entry in the "Display measurement result" field:
● "Automatic"
The measurement result window opens automatically.
● "manual"
The measurement result window is to be opened by pressing the
"Measurement result" softkey.
7. Select the required entry in the "Record machining times" and in the
"Save machining times" field.
Operating Manual, 05/2017, A5E40868721
Turning