Siemens SINUMERIK 840D sl Operating Manual page 743

Data
Zero points for G code pro‐
grams
-- only available for job list
with ShopTurn and G
code programs
Basic zero points
Directory
File name
Note
Magazine assignment
You can only read out the magazine assignments if your system provides support for loading
and unloading tool data to and from the magazine.
Procedure
...
Turning
Operating Manual, 05/2017, A5E40868721
● No
The selection box "Basis zero point" is hidden
● All
● No
● Yes
The directory is displayed, in which the selected program is located.
Here you have the option of changing the suggested file names.
1. Select the "Program Manager" operating area.
2. Position the cursor on the program whose tool and zero point data
you wish to back up.
3. Press the ">>" and "Archive" softkeys.
4. Press the "Setup data" softkey.
The "Backup setup data" window opens.
5. Select the data you want to back up.
6. When required, change the specified name of the originally selec‐
ted program here in the "File name" field.
7. Press the "OK" softkey.
The setup data will be set up in the same directory in which the
selected program is stored.
The file is automatically saved as INI file.
Managing programs
14.17 Setup data
743