Permit Modem; Request Remote Diagnostics - Siemens SINUMERIK 840D sl Operating Manual

References
A description of the configuration options can be found in the following reference:
SINUMERIK Operate Commissioning Manual
15.9.2

Permit modem

You can permit remote access to your control via a teleservice adapter IE connected at X127.
Procedure
15.9.3

Request remote diagnostics

Using the "Request remote diagnostics" softkey, from your control you have the option of
actively requesting remote diagnostics with your machinery construction OEM.
Turning
Operating Manual, 05/2017, A5E40868721
4. If you desire remote control, select the entry "Permit remote control".
In order that remote control is possible, the entry "Allow remote operation"
must be specified in the fields "Specified by PLC" and "Selected in HMI".
5. Enter new values in the group "Behavior for remote access confirmation"
if you wish to change the behavior for confirming remote access.
6. Press the "OK" softkey.
The settings are accepted and saved.
Machine manufacturer
Please refer to the machine manufacturer's instructions.
Software option
You need the "Access MyMachine /P2P" option to display the "Allow modem"
softkey.
1. The "Remote diagnostics (RCS)" window is opened.
2. Press the "Allow modem" softkey.
Access to the control via modem is enabled so that a connection is es‐
tablished.
3. To block access again, press the "Allow modem" softkey again.
Alarm, error and system messages
15.9 Remote diagnostics
769