Ctrl-E Profiles; Using The Energy-Saving Profile - Siemens SINUMERIK 840D sl Operating Manual

Ctrl-Energy

22.3 Ctrl-E profiles

Procedure
22.3 Ctrl-E profiles
22.3.1

Using the energy-saving profile

In the "Ctrl-E profiles" window, you can display all of the defined energy-saving profiles. Here,
you have the option of directly activating or inhibiting a required energy-saving profile, or re-
enabling profiles.
SINUMERIK Ctrl-Energy energy-saving profiles
Display
Energy-saving profile
active in [min]
Note
Disable all energy-saving profiles
For example, in order not to disturb the machine while measurements are being made, select
"Disable all".
Once the pre-warning time of a profile has been reached, an alarm window that shows the
remaining time is displayed. Once the energy-saving mode has been reached, then an
appropriate message is displayed in the alarm line.
832
1. The "Ctrl-E Analysis" window is open.
2. Press the "Long time measurement" softkey.
The "SINUMERIK Ctrl-Energy Analysis Long-term Measurement" win‐
dow opens.
The results of the long-term measurement are displayed.
3. Press the "Back" softkey to terminate the long-term measurement.
Meaning
All energy-saving profiles are listed.
The remaining time until the defined profile is reached is displayed.
Operating Manual, 05/2017, A5E40868721
Turning