Equipping Multitool With Tools - Siemens SINUMERIK 840D sl Operating Manual

Tool management
13.15 Working with multitool
Note
The tool creation sequence can be defined differently.
13.15.3

Equipping multitool with tools

Precondition
A multitool has been created in the tool list.
Procedure
Equip the multitool with tools
Load multitool
Load the tool into the multitool
696
The multitool is created in the tool list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The tool list is opened.
2. Select the required multitool, position the cursor on an empty mul‐
titool location.
3. Press the "New tool" softkey.
4. Using the appropriate selection list, e.g. favorites, select the re‐
quired tool.
2. Select the required multitool, position the cursor on an empty mul‐
titool location.
3. Press the "Load" softkey.
The "Load with..." window opens.
4. Select the required tool.
Operating Manual, 05/2017, A5E40868721
Turning