Machine Control Panel Menu - Siemens SINUMERIK 840D sl Operating Manual

HT 8

20.3 Machine control panel menu

20.3 Machine control panel menu
Here you select keys from the machine control panel which are reproduced by the software
by touch operation of the relevant softkeys.
See chapter "Controls on the machine control panel" for a description of the individual keys.
Note
PLC interface signals that are triggered via the softkeys of the machine control panel menus
are edge triggered.
Showing and hiding
The user menu key "U" displays the CPF softkey bar (vertical softkey bar) and the user softkey
bar (horizontal softkey bar).
814
All existing vertical and horizontal softkeys are covered or hidden, i.e. other
softkeys cannot be used.
Operating Manual, 05/2017, A5E40868721
Turning