Programming technology functions (cycles)
10.7 Additional cycles and functions in ShopTurn
Procedure for work offset, offset, rotation, scaling, mirroring or rotation C axis.
568
1.
The ShopTurn program has been created and you are in the editor.
2.
Press the "Various" and "Transformation" softkeys.
3.
Press the "Work offsets" softkey.
The "Work offsets" input window opens.
- OR -
Press the "Offset" softkey.
The "Offset" input window opens.
- OR -
Press the "Rotation" softkey.
The "Rotate" input window opens.
- OR -
Press the "Scaling" softkey.
The "Scaling" input window opens.
- OR -
Press the "Mirroring" softkey.
The "Mirroring" input window opens.
- OR -
Press the "Rotation C axis" softkey.
The "Rotation C axis" input window opens.
Operating Manual, 05/2017, A5E40868721
Turning