Delete Multitool; Loading And Unloading Multitool - Siemens SINUMERIK 840D sl Operating Manual

Tool management
13.15 Working with multitool
13.15.5

Delete multitool

Procedure
13.15.6

Loading and unloading multitool

Procedure
Load a multitool into the magazine
Loading a multitool into a magazine
698
1. The tool list is opened.
2. Position the cursor on the multitool that you wish to delete.
3. Press the "Delete multitool" softkey.
The multitool with all of the tools that are located in it is deleted.
1. The tool list is opened.
2. Position the cursor at the multitool that you wish to load into the
magazine.
3. Press the "Load" softkey.
The "Load to" window opens.
The "... location" field is pre-assigned with the number of the first
empty magazine location.
4. Press the "OK" softkey to load the multitool to the recommended
empty location.
- OR -
Enter the location number you require and press the "OK" softkey.
The multitool together with the tools in it is loaded to the specified
magazine location.
2. Position the cursor on the required empty magazine location.
3. Press the "Load" softkey.
The "Load with." window opens.
4. Select the required multitool.
5. Press the "OK" softkey.
Operating Manual, 05/2017, A5E40868721
Turning