Siemens SINUMERIK 840D sl Operating Manual page 680

Tool management
13.8 Magazine
Further parameters
If you have set up unique cutting edge numbers, these are displayed in the first column.
Column heading
D no.
SN
Magazine list icons
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow (con‐
figurable)
Red "X"
Procedure
See also
Displaying tool details (Page 683)
Changing the cutting edge position or tool type (Page 691)
680
Meaning
Unique cutting edge number
Cutting edge number
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 05/2017, A5E40868721
Turning