Siemens SINUMERIK 840D sl Operating Manual page 283

13. Positioning
14. Milling the rectangular pocket
Turning
Operating Manual, 05/2017, A5E40868721
Machined surface
Drilling depth
Z1
DT
4. Press the "Accept" softkey.
1. Press the "Drilling", "Positions" and "Freely Programmable Positions"
softkeys.
The "Positions" input window opens.
2. Enter the following parameters:
Machined surface
Coordinate system
Z0
C0
L0
C1
L1
C2
L2
C3
L3
3. Press the "Accept" softkey.
1. Press the "Milling", "Pocket" and "Rectangular pocket" softkeys.
The "Rectangular Pocket" input window opens.
2. Enter the following technology parameters:
T Miller_D8
3. Enter the following parameters:
Machined surface
9.18 Example: Standard machining
Face C
Tip
10inc
0s
Face C
Polar
0abs
0abs
16abs
90abs
16abs
180abs
16abs
270abs
16abs
D1 F 0.030 mm/tooth
Face C
Creating a ShopTurn program
V 200 m/min
283