Programming technology functions (cycles)
10.3 Contour turning
Parameter
Description
ZD
- (only for ∇ machining)
- (only for blank description, cylinder and allowance)
● For blank description, cylinder
● For blank description, allowance
Allowance
Allowance for pre-finishing - (only for ∇∇∇)
● Yes
● No
U1
Compensation allowance in X and Z direction (inc) – (only for allowance)
● Positive value: Compensation allowance is kept
● Negative value: Compensation allowance is removed in addition to finishing
* Unit of feedrate as programmed before the cycle call
Hidden parameters
Parameter
Description
Residual material
With subsequent residual material removal
SC
Safety clearance
DI
Continuous cut - (only for ∇)
Set machining area
Set machining area limits
limits
N
Number of grooves
10.3.11
Plunge-cutting rest (CYCLE952)
Function
The "Grooving residual material" function is used when you want to machine the material that
remained after grooving along the contour.
414
–
Version, absolute:
Cylinder dimension (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
–
Allowance on the CYCLE62 finished part contour (inc)
U1 contour allowance
allowance
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Value
Can be set in SD
No
0
No
1
Operating Manual, 05/2017, A5E40868721
Unit
mm
mm
x
Turning