Siemens SINUMERIK 840D sl Operating Manual page 278

Creating a ShopTurn program
9.18 Example: Standard machining
7. Stock removal (finishing)
278
T Roughing tool_55 D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
D 2inc
Cutting depth
UX
UZ
DI
Relief cuts
FR
Set machining area limits No
4. Press the "Accept" softkey.
1. Press the "Cont. turn." and "Stock removal" softkeys.
The "Stock Removal" input window opens.
2. Enter the following technology parameters:
T Finishing tool_D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
Allowance
Relief cuts
Set machining area limits No
4. Press the "Accept" softkey.
F 0.35 mm/rev V 400 m/min
Roughing (∇)
Longitudinal
outside
0.4inc
0.2inc
0
Yes
0.200mm/rev
F 0.1 mm/rev V 450 m/min
Finishing (∇∇∇)
Longitudinal
outside
(from the face to the rear side)
No
Yes
Operating Manual, 05/2017, A5E40868721
Turning