Siemens SINUMERIK 840D sl Operating Manual page 293

Approach/retraction
1. The tool moves with G0 to safety clearance of the reference point.
2. The tool is inserted into the workpiece with G1 and the programmed feedrate F until it
reaches the programmed final depth Z1.
3. When a dwell time DT expires, the tool is retracted at rapid traverse G0 to the retraction
plane.
Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameter Description
Machining posi‐
● Single position
tion (only for G
Drill hole at programmed position
code)
● Position pattern
Position with MCALL
Z0 (only for G Reference point Z
code)
Machining
● Face C
surface
● Face Y
(only for Shop‐
● Peripheral surface C
Turn)
● Peripheral surface Y
Turning
Operating Manual, 05/2017, A5E40868721
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Drilling Reaming" softkey.
4. Press the "Drilling" softkey.
The "Drilling" input window opens.
● Complete
mm
mm
Programming technology functions (cycles)
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
10.1 Drilling
mm/min
mm/rev
rpm
m/min
Unit
mm
293