Siemens SINUMERIK 840D sl Operating Manual page 646

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Multi-channel machining
11.2 Multi-channel support
Parameters
Work offset
- for take zero point
"yes"
Z1
F
Parameters
Machining side function
Spindle selection
Work offset
Work offset
write to
ZV - only for
work offset
write "yes"
Park counter-spindle
Z4P - for park counter-
spindle "yes"
Z4W
646
Description
Work offset in which the coordinate system offset by Z1 must be saved.
● Basic reference
● G54
● G55
● G56
● G57
● ...
Amount by which the workpiece is withdrawn from the main spindle (inc)
Feedrate
Description
● Main spindle
Machining along the main spindle
● Counter-spindle
Machining along the counter-spindle
Work offset in which the coordinate system, which was shifted according to ZW
and by ZV as well as mirrored in Z, must be saved:
● Basic reference
● G54
● G55
● G56
● G57
● ...
● Yes
The Z value of the work offset can be directly written to the input screen form.
● No
The actual Z value of the work offset is used.
● Offset Z = 0
● Workpiece zero is offset in Z direction (inc, the sign is also evaluated)
Traverse counter-spindle to park position - for "main spindle" selection
● Yes
● No
Park position of the counter-spindle (abs); MCS
Machining position of the counter-spindle (abs); MCS
Unit
mm/min
Unit
mm
mm
Operating Manual, 05/2017, A5E40868721
Turning

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d

Table of Contents