Siemens SINUMERIK 840D sl Operating Manual page 239

Parameter screen with help display and graphic view
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Figure 9-3
The animated help displays are always displayed with the correct orientation to the selected
coordinate system. The parameters are dynamically displayed in the graphic. The selected
parameter is displayed highlighted in the graphic.
Turning
Operating Manual, 05/2017, A5E40868721
1. Press the <Cursor right> key to open a selected program block or
cycle in the work plan.
The associated parameter screen with help display is then dis‐
played.
2. Press the "Graphic view" softkey.
The graphic view of the selected program block is displayed.
Parameter screen with dynamic help display
Press the "Graphic view" softkey to toggle between the help display and
the graphic view in the screen.
Creating a ShopTurn program
9.2 Program views
239