Siemens SINUMERIK 840D sl Operating Manual page 332

Programming technology functions (cycles)
10.1 Drilling
Procedure
Parameter Description
LAB Repeat jump label for position
(only for G code)
PL Machining plane
(only for G code)
Axes Selection of the participating axes
(only for G code)
● XY (1st and 2nd axis of the plane)
● ZC (rotary axis and assigned linear axis)
● YZC (rotary axis and both axes of the plane)
Note:
Rotary axes are only displayed in the selection field if they have been released for use
in the position pattern.
Please observe the information provided by your machine manufacturer.
Machining
● Face C
surface
● Face Y
● Face B
(only for Shop‐
● Peripheral surface C
Turn)
● Peripheral surface Y
Position ● At the front (face)
(only for Shop‐
● At the rear (face)
Turn)
● Outside (peripheral surface)
● Inside (peripheral surface)
Coordinate ● Right-angled or polar
system
Dimensions in right-angled coordinates or polar coordinates (only for face C and face
Y)
(only for Shop‐
Turn)
● Right-angled or cylindrical
Dimensions in right-angled coordinates or cylindrical coordinates - (only for peripheral
surface C)
332
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Positions" and "Arbitrary positions" softkeys.
The "Positions" input window opens.
Unit
Operating Manual, 05/2017, A5E40868721
Turning