Simulating machining
7.1 Overview
calculates an appropriate zero offset for the main spindle - or where relevant for the
counterspindle - from the specified chuck dimensions.
Programmable frames
All frames and zero offsets are taken into account in the simulation.
Note
Manually swiveled axes
Note that swivel movement in simulation and during simultaneous recording is also displayed
when the axes are swiveled manually at the start.
Display of the traversing paths
The traversing paths of the tool are shown in color. Rapid traverse is red and the feedrate is
green.
Note
Displaying the tailstock
The tailstock is only visible with the option "ShopMill/ShopTurn".
References
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
196
Machine manufacturer
Please also refer to the machine manufacturer's specifications.
Operating Manual, 05/2017, A5E40868721
Turning