Siemens SINUMERIK 840D sl Operating Manual page 276

Creating a ShopTurn program
9.18 Example: Standard machining
5. Stock removal (roughing)
276
R 23abs
Afterwards, entry fields are inactive.
6.4 Using the "Dialog selection" softkey, select a required contour element
and confirm using the "Dialog accept" softkey. The entry fields are active
again. Enter the additional parameters.
FS 2
6.5 Z -80abs
6.6 X 90abs
6.7 Z -95abs
7. Press the "Accept" softkey.
Finished-part contour
1. Press the "Cont. turn." and "Stock removal" softkeys.
The "Stock Removal" input window opens.
2. Enter the following technology parameters:
T Roughing tool 80 D1
3. Enter the following parameters:
Machining
Machining direction
X 60abs
R 6
Z -85abs FS3
F 0.350 mm/rev
Roughing (∇)
Longitudinal
Operating Manual, 05/2017, A5E40868721
K -35abs I 80 abs
V 400 m/min
Turning