Siemens SINUMERIK 840D sl Operating Manual page 534

Programming technology functions (cycles)
10.5 Contour milling
6. Removing residual stock
7. Contour pocket 2
8. Removing residual stock
Clamping the spindle
For ShopTurn, the "Clamp spindle" function can be set up by the machine manufacturer.
See also
Clamping the spindle (Page 248)
Procedure
G code program parameters
PRG Name of the program to be generated
PL Machining plane
Milling direction
● Climbing
● Conventional
RP Retraction plane
SC Safety clearance
F Feedrate
534
Software option
For removing residual stock, you require the option "residual stock detection
and machining".
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Milling", "Contour milling" and "Pocket resid. mat." softkeys.
The "Pocket Res. Mat." input window opens.
3. For the ShopTurn program, press the "All parameters" softkey if you want
to enter additional parameters.
mm
mm
mm/min
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 05/2017, A5E40868721
mm/min
mm/tooth
rpm
m/min
Turning