Tool Details; Displaying Tool Details - Siemens SINUMERIK 840D sl Operating Manual

13.9

Tool details

13.9.1

Displaying tool details

The following parameters of the selected tool can be displayed using softkeys in the "Tool
Details" window.
● Tool data
● Cutting edge data
● Monitoring data
Procedure
...
Turning
Operating Manual, 05/2017, A5E40868721
- OR -
Press the "Unload all" softkey.
A prompt is displayed as to whether you really want to unload, load or
relocate all tools.
3. Press the "OK" softkey to go ahead and delete, unload, load, or relocate
the tools.
The tools are deleted from the magazine, unloaded from the magazine,
loaded into the magazine, or relocated in ascending order of magazine
location numbers.
4. Press the "Cancel" softkey if you wish to cancel the unloading operation.
1. The tool list, the wear list, the OEM tool list or the magazine is open.
2. Position the cursor to the desired tool.
3. If you are in the tool list or in the magazine, press the ">>" and "Details"
softkeys.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window opens.
All of the available tool data are displayed.
Tool management
13.9 Tool details
683