Technical Data - Siemens FC2025 Manual

Updating the firmware
Operation
Press S32 + 'Acknowledge'
(front operating button) for
> 2 s at the same time
S33: Switch for ground fault supervision of the Ethernet Connection
S33
OFF
On
S38: Switch for Ground Fault
•
interface, which can also be deactivated with S33
•
module, have their own supervision and are not included in the deactivation of ground fault
supervision.
S39
On
Off

Technical Data

6.9
Supply input Voltage
Standby current (display illumination off)
Alarm current (display illumination on)
Display Number of lines
Resolution
Interfaces Serial modules
Networking
Peripheral data bus
Siemens Industry, Inc.
Building Technologies Division
Function
Panel's firmware is updated.
A short beeping sound confirms the function is being executed.
Position Function
Default settings
Setting for networking via FCnet/C-Web
Setting for networking via Ethernet
S38 deactivates the panel's internal ground fault supervisor including the Ethernet
Electrically isolated components, such as network module (SAFEDLINK) or RS-485
Position Function
Ground fault supervision activated
Ground fault supervision deactivated
FS20 Marine Fire Detection Panel Control Panel
24 VDC
130 mA
170 mA + 1 mA per LED
8 lines
256 x 112 pixels
For class A RS-485 module for

connecting an external printer or
FT2015
Network module (SAFEDLINK)

functionality (incl. degraded mode
function)
Ethernet connection RJ45,

10/100 Mbit/s
X3, X400
37
A6V10519176_enUS_b