Setting Up And Editing Data Records - Siemens OP5 Equipment Manual

8.1

Setting Up and Editing Data Records

The OP automatically sets up a data record with the number 1 and the name
"data record" for each recipe. All values of the data records are preset
with 0.
You can edit this data record. To set up more data records, either copy this
data record (see chapter 8.2), or edit the first data record and save it under a
different name.
Editing data Proceed as follows to change existing recipe, data record values.
records
1. Select standard screen Records
2. Select the desired recipe in the recipe directory.
3. Select the data record to be edited in the data record directory.
Note
You can have the recipe title displayed by paging up in the first entry.
4. Position cursor on the value to be changed.
5. Enter numeric or symbolic value.
6. Confirm the value. If you want to change more values, position the cur-
7. To conclude editing data records after the last modified value has been
8. Save: Position cursor on the Yes field and confirm with ENTER.
9. Overwrite: Press ENTER.
10. Exit standard screen with ESCAPE.
As long as you have not confirmed an input value, you can terminate editing
with ESCAPE. The old value is then displayed again.
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
sor in the input field of the next entry and change the value there.
accepted, press ESCAPE. You will then be asked whether you want to
save the data record.
Do not save: Press ESCAPE.
Since the data record number already exists, you will then be asked
whether you want to overwrite the data record.
Do not overwrite: Press ESCAPE.
Edit
Recipes
8-5