Delete Data - Siemens SIMOVERT OP1S Operating Instructions Manual

OP1S Operator Control Panel

3.7 Delete data

With the "Delete data" function, the user can delete parameter sets stored in the OP1S,
thus, for example, creating space for new sets of parameters. Starting from the basic
menu, the "Delete data" function is selected with "Lower" or "Raise" and activated with
"P".
P
Ì Î
MotionControl Delete data
OP: Upread *1909199701
OP: Download MASTERDRIVES MC
#Delete data PLUS
Example: Selection and activation of the "Delete data" function
One of the parameter sets stored in the OP1S must now be selected with "Lower" or
"Raise" (displayed in the second line). With "P", the selected ID is confirmed. The slave
ID can now be displayed with "Lower" or "Raise" (see section "Slave ID"). The "Delete
data" procedure can then be started with "P". After completion, the message "Data
deleted" appears and the display returns to the basic menu.
Siemens AG 477 459 4070 76 J AA-74
SIMOVERT MASTERDRIVES Operating Instructions
13