Serial Settings; Date/Time - Extron electronics XMP 240 C AT User Manual

Serial Settings

The Serial Settings
port. Click
NOTE: The recommended baud rate for the XMP 240 C AT is 38400.
Figure 116.

Date/Time

Figure 117.
To set the date and time:
1. Click the
on the connected PC.
2. Set the time zone by using the
3. Use the
(default).
-or-
1. Click on the Set Date and Time check box.
2.
Enter the desired date in the
selection.
3. Enter the desired time in the
tab allows users to change the baud rate of the rear panel RS-232
to save the changes.
Apply
Serial Settings Tab
Date/Time Tab
button to sync the date and time information with the date and time
Set Local
Zone
radio buttons to enter the daylight saving region, or leave off
Daylight Savings
Date
Time
drop-down.
field. A drop-down calendar is available for date
field by clicking on the hours and entering the hour,
XMP 240 C AT • Configuration Tools 85