Overview Of A Monitoring Interface; Configuring The Association Between A Monitoring Interface And The Nms; Establishing The Configuration Task - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management

7.1 Overview of a Monitoring Interface

The monitoring interface of the S3700-28TP-EI-MC connects four input lines. These four input
lines monitor the cabinet door, device power supply, battery power, and power supply of the air
conditioner. You can decide which devices to be monitored. When the status of the four input
lines changes, the S3700 generates related traps and sends them to the network management
system (NMS). In this case, it is not necessary to define output rules. The monitoring interface
of the S3700 connects three output lines. These output lines can connect audible and visual trap
devices. In this manner, device environment monitoring is implemented.
7.2 Configuring the Association Between a Monitoring
Interface and the NMS

7.2.1 Establishing the Configuration Task

Applicable Environment
The monitoring interface of the S3700-28TP-EI-MC connects four input lines. These four input
lines monitor the cabinet door, device power supply, battery power, and power supply of the air
conditioner. Based on the status of the four input lines, the S3700 generates related traps and
sends them to the NMS. In this case, it is not necessary to define output rules. Each input line
corresponds to two traps.
Line ID
1
2
3
4
Pre-configuration Tasks
Before configuring a monitoring interface, complete the following tasks:
l
l
Data Preparation
To configure a monitoring interface, you need the following data.
Issue 01 (2011-07-15)
Normal Status
low-level
high-level
low-level
low-level
The device is normally started.
The monitoring card runs normally.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring a Monitoring Interface
Trap(Warning)
InputLine1 abnormal InputLine1 normal
InputLine2 abnormal InputLine2 normal
InputLine3 abnormal InputLine3 normal
InputLine4 abnormal InputLine4 normal
Trap(Cancel)
65