Optional) Setting The Step Between Acl Rules; Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
A user-defined ACL is configured.
----End

10.3.9 (Optional) Setting the Step Between ACL Rules

The S3700 can automatically allocates numbers to ACLs according to the step between ACL
rules.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl acl-number
Or, run:
acl name acl-name
The ACL view is displayed.
Step 3 Run:
step step-value
The step between ACL rules is set.
When changing ACL configurations, pay attention to the following point:
l The undo step command sets the default step of an ACL and re-arranges the numbers of
l By default, the value of step-value is 5.
----End

10.3.10 Checking the Configuration

Checking the Configuration of ACL.
Prerequisite
The configurations of the ACL are complete.
Procedure
l
l
l
l
----End
Issue 01 (2011-07-15)
ACL rules.
Run the display acl { acl-number | all } command to check the ACL rule based on the
number.
Run the display acl name acl-name command to check the ACL rule based on the name.
Run the display time-range { all | time-name } command to check the time range.
Run the display acl resource [ slot slot-id ] command to check information about ACL
resources.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 ACL Configuration
231