Device Status - Hirschmann MICE MS20 User Manual

Device status

Display status
Port status
Device status
U
These LED's provide information about conditions which affect the ope-
ration of the whole device.
P- Power (green LED)
lit green
not lit
P1 - Power 1 (green LED)
lit green
not lit
P2 - Power 2 (green LED)
lit green
not lit
RM - Redundancy Manager
(green/yellow LED)
lit green
lit yellow
not not
flashes green
RUN - BOOT/RUN
(green LED)
lit green
flashes green
not lit
RL1 - Relay 1, signal contact
(red/yellow LED)
lit red
lit yellow
not lit
RL2 - Relay 2, signal contact
(red/yellow LED)
lit red
lit yellow
not lit
MS20/MS30
Release 2.0 02/06
Meaning
internal supply voltage on
internal supply voltage too low
Meaning
supply voltage 1 on
supply voltage 1 under 18 V
Meaning
supply voltage 2 on
supply voltage 2 under 18 V
Meaning
RM function active, redundant port not active
RM function active, redundant Port active
RM function not active
Incorrect configuration of the HIPER-Ring (e.g., the
Ring is not connected to the ring port).
Meaning
System is ready for operation
System booting
System in reset state
Meaning
The signal contact 1 is open, i.e. it indicates an error
The signal contact 1 is open, the "manual setting" is
active
The signal contact 1 is closed, i.e. it does not indicate
an error
Meaning
The signal contact 1 is open, i.e. it indicates an error
The signal contact 1 is open, the "manual setting" is
active
The signal contact 1 is closed, i.e. it does not indicate
an error
31