D-Link DGS-510 Reference Manual page 132

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Example
This example shows how to display the IPv6 neighbor cache entry.
Switch# show ipv6 neighbors
IPv6 Address
-------------------------------------- ----------------- --------- ---- -----
FE80::200:11FF:FE22:3344
Total Entries: 1
Switch#
Display Parameters
Type
State
Link-Layer Addr
00-00-11-22-33-44 vlan1
D – Dynamic learning entry.
S – Static neighbor entry.
INCMP: (Incomplete) Address resolution is being performed on the
entry, but the corresponding neighbor advertisement message has
not yet been received.
REACH: (Reachable) Corresponding neighbor advertisement
message was received and the reachable time (in milliseconds) has
not elapsed yet. It indicates that the neighbor was functioning
properly.
STALE: More than the reachable time (in milliseconds) have
elapsed since the last confirmation was received.
PROBE - Sending the neighbor solicitation message to confirm the
reachability.
129
Interface Type State
D REACH