D-Link DGS-510 Reference Manual page 182

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to clear the DHCP binding entry, including the manually configured binding entry.
Example
This example shows how to clear all snooping binding entries.
Switch# clear ip dhcp snooping binding
Switch#
18-6 renew ip dhcp snooping database
This command is used to renew the DHCP binding database.
renew ip dhcp snooping database URL
Parameters
URL
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Using this command will cause the system to load the bind entry database from a URL and add the
entries to the DHCP snooping binding entry table.
Example
This example shows how to renew the DHCP snooping binding database.
Switch# renew ip dhcp snooping database tftp: //10.0.0.2/store/dhcp-snp-bind
Switch#
18-7 ip dhcp snooping binding
This command is used to manually configure a DHCP snooping entry.
ip dhcp snooping binding MAC-ADDRESS vlan VLAN-ID IP-ADDRESS interface INTERFACE-
ID expiry SECONDS
Specifies load the bind entry database from the URL and add the
entries to the DHCP snooping binding entry table.
179