Editing Features - D-Link DGS-510 Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Invalid input detected at
^marker
The following example shows how an ambiguous command error message is generated.
Switch# show v
Ambiguous command
Switch#
The following example shows how an incomplete command error message is generated.
Switch# show
Incomplete command
Switch#
The following example shows how an invalid input error message is generated.
Switch# show verb
Invalid input detected at ^marker
Switch#

Editing Features

The command line interface of this switch supports to following keyboard keystroke editing features.
Keystroke
Delete
Backspace
Left Arrow
Right Arrow
CTRL+R
Return
Space
ESC
Display Result Output Modifiers
Results displayed by show commands can be filtered using the following parameters:
 begin FILTER-STRING - This parameter is used to start the display with the first line that
matches the filter string.
 include FILTER-STRING - This parameter is used to display all the lines that match the filter
string.
 exclude FILTER-STRING - This parameter is used to exclude the lines that match the filter
string from the display.
The command was entered incorrectly.
^
Description
Deletes the character under the cursor and shifts the remainder of
the line to the left.
Deletes the character to the left of the cursor and shifts the
remainder of the line to the left.
Moves the cursor to the left.
Moves the cursor to the right.
Toggles the insert text function on and off. When on, text can be
inserted in the line and the remainder of the text will be shifted to
the right. When off, text can be inserted in the line and old text will
automatically be replaced with the new text.
Scrolls down to display the next line or used to issue a command.
Scrolls down to display the next page.
Escapes from the displaying page.
7