D-Link DGS-510 Reference Manual page 634

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Example
This example shows how to display the surveillance VLAN global settings.
Switch# show surveillance vlan
Surveillance VLAN ID
Surveillance VLAN CoS : 5
Aging Time
ONVIF Discover Port
Member Ports
Dynamic Member Ports
Surveillance VLAN OUI :
OUI Address
-----------------
28-10-7B-00-00-00
28-10-7B-20-00-00
B0-C5-54-00-00-00
F0-7D-68-00-00-00
Total OUI: 4
Switch#
68-11 show surveillance vlan onvif-ipc interface
This command is used to display ONVIF-based IPC information.
show surveillance vlan onvif-ipc interface [INTERFACE-ID [,|-]] {brief | detail}
Parameters
INTERFACE-ID
,
-
brief
detail
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display brief or detailed ONVIF-based IPC information.
: 100
: 30 minutes
: 554
:
:
Mask Component Type
----------------- ---------------
FF-FF-FF-E0-00-00 D-Link Device
FF-FF-FF-F0-00-00 D-Link Device
FF-FF-FF-80-00-00 D-Link Device
FF-FF-FF-F0-00-00 D-Link Device
(Optional) Specifies the port to be displayed.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and
after the comma.
(Optional) Specifies a range of interfaces. No space is allowed
before and after the hyphen.
Specifies to display brief ONVIF-based IP camera information.
Specifies to display detailed ONVIF-based IP camera information.
631
Description
--------------
IP Surveillance Device
IP Surveillance Device
IP Surveillance Device
IP Surveillance Device