D-Link DGS-510 Reference Manual page 337

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Example
This example shows how to display all of the entries blocked by the IMPB access control.
Switch# show ip ip-mac-port-binding violation
Port
------- --------- -------------------
eth3/0/3
eth3/0/3
eth3/0/4
eth3/0/4
Total Entries: 4
Switch#
This example shows how to display the IMPB configuration for all ports.
Switch# show ip ip-mac-port-binding
Port
---------- ------------
eth3/0/1
eth3/0/2
eth3/0/3
eth3/0/4
Total Entries: 4
Switch#
37-4 snmp-server enable traps ip-mac-port-binding
This command is used to enable the sending of the SNMP notifications for IP-MAC-Port Binding. Use
the no form of this command to disable sending SNMP notifications.
snmp-server enable traps ip-mac-port-binding
no snmp-server enable traps ip-mac-port-binding
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable or disable the sending of the SNMP notifications for such events. When
enabled, the Switch sends violation traps if any violation packet is received.
VLAN MAC Address
1 01-00-0c-cc-cc-cc
1 01-80-c2-00-00-00
1 01-00-0c-cc-cc-cd
1 01-80-c2-00-00-01
Mode
Strict
Strict
Loose
Loose
334