D-Link DGS-510 Reference Manual page 325

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
IP source guard binding entries are either manually configured or automatically learned by DHCP
snooping to guard IP traffic.
Example
This example shows how to display IP Source Guard binding entries without any parameters.
Switch# show ip source binding
MAC Address
----------------- --------------- ---------- ------------- ----- -----------
00-01-01-01-01-01 10.1.1.10
00-01-01-01-01-10 10.1.1.11
Total Entries: 2
Switch#
This example shows how to display IP Source Guard binding entries by IP address 10.1.1.10.
Switch# show ip source binding 10.1.1.10
MAC Address
----------------- --------------- ---------- ------------- ----- ----------
00-01-01-01-01-01 10.1.1.10
Total Entries: 1
Switch#
This example shows how to display IP Source Guard binding entries by IP address 10.1.1.11, MAC
address 00-01-01-01-01-10, at VLAN 100 on interface eth3/0/3 and learning by DHCP snooping.
Switch# show ip source binding 10.1.1.10 00-01-01-01-01-10 dhcp-snooping vlan 100
interface eth3/0/3
MAC Address
----------------- --------------- ---------- ------------- ----- -----------
00-01-01-01-01-10 10.1.1.11
Total Entries: 1
Switch#
Display Parameters
MAC Address
IP Address
Lease (sec)
IP Address Lease(sec)
infinite
3120
IP Address Lease(sec)
infinite
IP Address Lease(sec)
3564
The client's hardware MAC address.
The client's IP address assigned from the DHCP server or
configured by the user.
The IP address lease time.
322
Type VLAN
static 100
dhcp-snooping 100
Type VLAN
static 100
Type VLAN
dhcp-snooping 100
Interface
eth3/0/3
eth3/0/3
Interface
eth3/0/3
Interface
eth3/0/3