D-Link DGS-510 Reference Manual page 547

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
8021x
arp
dhcp
dns
gvrp
icmp
icmpv6-ndp
icmpv6-other
Igmp
lacp
snmp
ssh
stp
telnet
tftp
web
Example
This example shows how to configure the threshold of ARP protocol packets as 100 packets per
second.
Switch# configure terminal
Switch(config)# cpu-protect type arp pps 100
Switch(config)#
59-5 show cpu-protect safeguard
This command is used to display the settings and status of the Safeguard Engine.
show cpu-protect safeguard
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the settings and status of the Safeguard Engine.
Port-based Network Access Control
IP Address Resolution Protocol (ARP)
Dynamic Host Configuration
Domain Name Services
GARP VLAN Registration Protocol
IPv4 Internet Control Message Protocol
IPv6 ICMP Neighbor Discover Protocol
(NS/NA/RS/RA)
IPv6 ICMP except NDP NS/NA/RS/RA
Internet Group Management Protocol
Link Aggregation Control Protocol
Simple Network Management Protocol
Secured shell
Spanning Tree Protocol (802.1D)
Telnet
Trivial File Transfer Protocol
HTTP and HTTPS
544
interface)
Protocol
Protocol
Protocol
Protocol
Protocol
Protocol
Protocol
Protocol
Protocol
Protocol
Manage
Manage
Protocol
Manage
Manage
Manage