D-Link DGS-510 Reference Manual page 226

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Example
This example shows how to enable the DoS prevention mechanism for land attack.
Switch# configure terminal
Switch(config)# dos-prevention land
Switch(config)#
This example shows how to enable the DoS prevention mechanism on all supported types.
Switch# configure terminal
Switch(config)# dos-prevention all
Switch(config)#
This example shows how to disable the DoS prevention mechanism for all supported types.
Switch# configure terminal
Switch(config)# no dos-prevention all
Switch(config)#
25-2 show dos-prevention
This command is used to display the DoS prevention status and related drop counters.
show dos-prevention [DOS-ATTACK-TYPE]
Parameters
DOS-ATTACK-TYPE
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about DoS prevention.
Example
This example shows how to display the configuration information of the DoS prevention.
(Optional) Specifies the DoS type to be displayed.
223