D-Link DGS-510 Reference Manual page 86

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# configure terminal
Switch(config)# line console
Switch(config-line)# password 123
Switch(config-line)#
5-25 clear line
This command is used to disconnect an active session on the switch.
clear line LINE-ID
Parameters
LINE-ID
Default
None.
Command Mode
Privilege EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to disconnect an active session on the switch.
Example
This example shows how to disconnect the line session 2.
Switch# clear line 1
Switch#
Specifies the line ID to disconnect a connection session. The value
is from 1 to 22.
83