Table of Contents
Advertisement
DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Lease (seconds)
Type
VLAN
Interface
18-16
show ip dhcp snooping database
This command is used to display the statistics of the DHCP snooping database.
show ip dhcp snooping database
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display DHCP snooping database statistics.
Example
This example shows how to display DHCP snooping database statistics.
Switch# show ip dhcp snooping database
URL: tftp://10.0.0.2/store/dhcp-snp-bind
Write Delay Time: 300 seconds
Last ignored bindings counters :
Binding collisions :
Invalid interfaces :
Parse failures
Switch#
Display Parameters
Binding Collisions
Expired leases
Invalid interfaces
Parse failures
Checksum errors
The IP address lease time.
The Binding type configured from the CLI or dynamically learned.
The VLAN ID.
The interface that connects to the DHCP client host.
0
Expired
0
Unsupported vlans :
:
0
Checksum errors
The number of entries that created collisions with exiting entries in
DHCP snooping database.
The number of entries that expired in the DHCP snooping database.
The number of interfaces that received the DHCP message but
DHCP snooping is not performed.
The number of illegal DHCP packets.
The number of calculated checksum values that is not equal to the
stored checksum.
188
lease
:
0
0
:
0
Advertisement
Table of Contents
