D-Link DGS-510 Reference Manual page 251

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Default
None.
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to associate an ERP instance with a G.8032 profile. Multiple ERP instances
can be associated with the same G.8032 profile.
Example
This example shows how to associate the profile "campus" with instance 1.
Switch#configure terminal
Switch(config)#ethernet ring g8032 ring1
Switch(config-erp)#instance 1
Switch(config-erp-instance)#profile campus
Switch(config-erp-instance)#
28-11 port0
This command is used to specify the first ring port of a physical ring. Use the no form of this
command to remove the settings.
port0 interface INTERFACE-ID
no port0
Parameters
INTERFACE-ID
Default
None.
Command Mode
ERP Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to specify or remove the first ring port of a physical ring.
Example
This example shows how to configure the interface "eth1/0/1" as the first ring port of the G.8032 ring
"ring1".
Switch#configure terminal
Switch(config)#ethernet ring g8032 ring1
Switch(config-erp)#port0 interface eth1/0/1
Switch(config-erp)#
Specifies the interface ID of the first ring port. The interface(s) can
be a physical interface or a port-channel.
248