D-Link DGS-510 Reference Manual page 666

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to enable or disable the SNTP function.
Example
This example shows how to enable the SNTP function.
Switch# configure terminal
Switch(config)# sntp enable
Switch(config)#
72-8 sntp interval
This command is used to set the interval for the SNTP client to synchronize its clock with the server.
sntp interval SECONDS
no sntp interval
Parameters
SECONDS
Default
By default, this value is 720 seconds.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to set the polling interval.
Example
This example shows how to configure the interval to 100 seconds.
Switch# configure terminal
Switch(config)# sntp interval 100
Switch(config)#
Specifies the synchronization interval from 30 to 99999 seconds.
663