D-Link DGS-510 Reference Manual page 313

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If no interface is specified, all existing physical ports will be displayed.
Example
This example shows how to display the VLAN interface information for interface VLAN 1.
Switch# show interfaces vlan1
VLAN1 is enabled, link status is down
Interface type: VLAN
Interface description: VLAN 1 for MIS
MAC address: 08-00-01-22-00-00
Switch#
This example shows how to display the NULL interface information for interface null0.
Switch# show interfaces null0
Null0 is enabled, link status is up
Interface type: Null
Interface description: Null0 for MIS
Switch#
This example shows how to display the interface information for eth1/0/1.
or other.
310