D-Link DGS-510 Reference Manual page 715

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Peripheral
Log Description
Event description: Fan Recovered.
Log Message: Unit <id>, <fan-descr> back to normal
Parameters description:
Unit <id>: The unit ID.
fan-descr: The FAN ID and position.
Event description: Fan Fail.
Log Message: Unit <id> <fan-descr> failed
Parameters description:
Unit <id>: The unit ID.
fan-descr: The FAN ID and position.
Event description: Temperature sensor enters alarm state.
Log Message: Unit <unit-id> <thermal-sensor-descr> detects abnormal
temperature <degree>
Parameters description:
unitID: The unit ID.
thermal-sensor-descr: The sensor ID and position.
degree: The current temperature.
Event description: Temperature recovers to normal.
Log Message: Unit <unit-id> <thermal-sensor-descr> temperature back to
normal
Parameters description:
unitID: The unit ID.
thermal-sensor-descr: The sensor ID and position.
Event description: Power failed.
Log Message: Unit <unit-id> <power-descr> failed
Parameters description:
unitID: The unit ID.
power-descr: The power position and ID.
Event description: Power is recovered.
Log Message: Unit <unit-id> <power-descr> back to normal
Parameters description:
unitID: The unit ID.
power-descr: The power position and ID.
Event description: Press the factory reset button.
Log Message: Unit <unit-id> factory reset button pressed
Parameters description:
unitID: The unit ID.
PoE
Log Description
Event description: Total power usage threshold is exceeded.
Log Message: Unit <unit-id> usage threshold <percentage> is exceeded
Parameters description:
unit-id : box id
percentage : usage threshold
712
Severity
Critical
Critical
Critical
Critical
Critical
Critical
Critical
Severity
Warning