D-Link DGS-510 Reference Manual page 712

Gigabit ethernet smartpro switch
Table of Contents

Advertisement

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: Logout through SSH.
Log Message: Logout through SSH (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
MAC-based Access Control
Log Description
Event description: A host has passed the authentication.
Log Message: MAC-based Access Control host login success (MAC: <mac-
address>, <interface-id>, VID: <vlan-id>)
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Event description: A host has aged out.
Log Message: MAC-based Access Control host aged out (MAC: <mac-
address>, <interface-id>, VID: <vlan-id>)
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Event description: A host failed to pass the authentication.
Log Message: MAC-based Access Control host login fail (MAC: <mac-
address>, <interface-id>, VID: <vlan-id>)
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Event description: The authorized user number on the whole device has
reached the maximum user limit.
Log Message: MAC-based Access Control enters stop learning state
Event description: The authorized user number on the whole device is below
the maximum user limit in a time interval.
Log Message: MAC-based Access Control recovers from stop learning state
Event description: The authorized user number on an interface has reached the
maximum user limit.
Log Message: <interface-id> enters MAC-based Access Control stop learning
state
Parameters description:
interface-id: The interface on which the host is authenticated
Event description: The authorized user number on an interface is below the
maximum user limit in a time interval.
Log Message: <interface-id> recovers from MAC-based Access Control stop
learning state
Parameters description:
interface-id: The interface on which the host is authenticated
709
Informational
Severity
Informational
Informational
Critical
Warning
Warning
Warning
Warning

Advertisement

Table of Contents
loading

Table of Contents