Table of Contents
Advertisement
DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
rate-limit
queue-rate-limit
dscp-mutation
map dscp-color
map cos-color
map dscp-cos
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display port level QoS configurations.
Example
This example shows how to display the default CoS for eth 1/0/2 to eth 1/0/5.
Switch# show mls qos interface eth1/0/2-5 cos
Interface
---------- ----
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
Switch#
This example shows how to display the port trust state for eth 1/0/2 to eth 1/0/5.
Switch# show mls qos interface eth1/0/2-1/0/5 trust
Interface
---------- ------------
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
Switch#
This example shows how to display the scheduling configuration for eth1/0/1 to eth1/0/2.
Specifies to displays the bandwidth limitation configured for the port.
Specifies to displays the bandwidth allocation configured for the
queue.
Specifies to displays the DSCP mutation map attached to the
interface.
Specifies to displays the DSCP to color map.
Specifies to displays the CoS to color map.
Specifies to displays the mapping of DSCP to CoS.
CoS
Override
---------
3
Yes
4
No
4
No
3
No
Trust State
trust DSCP
trust CoS
trust DSCP
trust CoS
521
Advertisement
Table of Contents
