D-Link DGS-510 Reference Manual page 255

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch#show ethernet ring g8032 status
Ethernet ring ring2,instance 0
-----------------------------------------
Description:
MEL: 1
Connect sub ring: ring1
R-APS Channel: invalid r-aps vlan,Protected VLAN:
Profile:
Guard timer: 500 milliseconds
Hold-Off timer: 0 milliseconds
WTR timer: 5 minutes
Revertive
Instance State: Deactivated
Admin RPL: -
Operational RPL: -
Port0 State: Forwarding
Port1 State: Forwarding
Admin RPL Port: -
Operational RPL Port: -
Ethernet ring campus,instance 0
-----------------------------------------
Description:
MEL: 1
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
This example shows how to display the brief information of the ERP instances.
Switch#show ethernet ring g8032 brief
Profile
-------------------------------- ---
campus
Total Entries: 4
Switch#
Display Parameters
MEL
R-APS Channel
Protected VLANs
Profile
Guard timer
Hold-Off timer
Inst Status
.ID
----------- -------------------
0 Deactivated p0:-,Forwarding
0 Deactivated p0:-,Forwarding
1 Deactivated p0:eth1/0/1,Forwarding(RPL)
0 Deactivated p0:-,Forwarding
Ring MEL value of ERP instance.
APS channel of ERP instance.
Service protected VLANs of ERP instance.
The profile associated with the ERP instance.
Time value for guard timer of the profile.
Time value for hold-off timer of the profile.
252
Port-State
p1:-,Forwarding
p1:-,Forwarding
p1:-,Forwarding
p1:-,Forwarding