Show Unit - D-Link DGS-510 Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the type is not specified, all types of environment information will be displayed.
Example
This example shows how to display fan, temperature, power availability and status information.
Switch#show environment
Detail Temperature Status:
Unit
----- ------------------------------------------------------
1
Status code: * temperature is out of threshold range
Detail Fan Status:
--------------------------------------------------------------
Right Fan 1 (OK)
Detail Power Status:
Unit Power Module
----- ----------------
1 Power 1
Switch#
Display Parameters
Power status
2-12

show unit

This command is used to display information about system units.
show unit [UNIT-ID]
Parameters
UNIT-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Temperature Descr/ID
Central Temperature/1
Right Fan 2 (OK)
Power Status
-------------
in-operation
in-operation: The power rectifier is in normal operation.
failed: The power rectifier not working normally.
empty: The power rectifier is not installed.
(Optional) Specify the unit to display.
Current/Threshold Range
29C/11~79C
18