GE MiCOM P40 Technical Manual page 830

Appendix B -Settings and Signals
MENU TEXT
IEC61850 versions only. Displays the IP address of the secondary SNTP server.
IEC 61850 SCL
IEC61850 versions only.
IED Name
IEC61850 versions only. 8 character IED name, which is the unique name on the IEC 61850 network for the IED, usually taken from the SCL
file.
IEC 61850 GOOSE
IEC61850 versions only.
GoEna
IEC61850 versions only. Setting to enable GOOSE publisher settings.
Publisher Sim
IEC 61850 versions only. The Publisher Sim cell allows the simulation bit to be sent in the GOOSE message, for example for testing or
commissioning.
When 'Disabled' is selected, the simulation bit for the goose control block is not set.
When 'Enabled' is selected, the simulation bit for the goose control block is set.
Once testing is complete the cell must be set back to 'Disabled' to restore the GOOSE scheme back to normal service.
Note: The cell 'Test Mode' under IED Configurator used in software prior to IEC 61850 Edition 2 has been renamed as 'Publisher Sim'
Ignore Test Flag
Be removed after Cat2,This setting is determines whether GOOSE messages with an IEC 61850 Test mode flag are ignored or processed as
valid by the IED.
PROT COMMS/ IM64
This column contains settings for Current Differtial/IM64 Configuration
Scheme Setup
Settings to determine how many relay ends are connected in the differential zone or how many relays are connected to the teleprotection
scheme for the protected line, with two or three ends possible.
For a plain two terminal line, there is an additional option to use dual communication channels, to implement redundancy (i.e. employ a
parallel "hot-standby" path).
Address
B84
COL ROW DEFAULT SETTING
19 50
19 51
19 60
19 70 0x00000000
19 71 0x00000000
19 73 No
20 00
20 01 2 Terminal
20 02 0-0
DESCRIPTION
IED Name
[ASCII text]
Disabled
Enabled
[Binary Flag (32)]
Disabled
Pass Through
Forced
[Binary Flag (32) Indexed String]
No
Yes
[Indexed String]
3 Terminal
2 Terminal
Dual Redundant
[Indexed String]
0-0
1-A
2-A
3-A
4-A
5-A
6-A
7-A
8-A
9-A
10-A
11-A
12-A
13-A
14-A
15-A
16-A
17-A
18-A
AVAILABLE OPTIONS
P446SV-TM-EN-1
P446SV