GE MiCOM P40 Technical Manual page 815

P446SV
MENU TEXT
Allows the SET / RESET text, displayed in the hotkey menu, to be changed to something more suitable for the application of an individual
control input, such as ON / OFF, IN / OUT etc.
Control Input 29
Configures the control inputs as either 'latched' or 'pulsed'.
Ctrl Command 29
Allows the SET / RESET text, displayed in the hotkey menu, to be changed to something more suitable for the application of an individual
control input, such as ON / OFF, IN / OUT etc.
Control Input 30
Configures the control inputs as either 'latched' or 'pulsed'.
Ctrl Command 30
Allows the SET / RESET text, displayed in the hotkey menu, to be changed to something more suitable for the application of an individual
control input, such as ON / OFF, IN / OUT etc.
Control Input 31
Configures the control inputs as either 'latched' or 'pulsed'.
Ctrl Command 31
Allows the SET / RESET text, displayed in the hotkey menu, to be changed to something more suitable for the application of an individual
control input, such as ON / OFF, IN / OUT etc.
Control Input 32
Configures the control inputs as either 'latched' or 'pulsed'.
Ctrl Command 32
Allows the SET / RESET text, displayed in the hotkey menu, to be changed to something more suitable for the application of an individual
control input, such as ON / OFF, IN / OUT etc.
INTERMICOM COMMS
This column is only visible if the model number supports InterMiCOM and second rear comms board is fitted.
IM Output Status
Displays the status of each InterMiCOM output signal.
IM Input Status
Displays the status of each InterMiCOM input signal, with IM1 signal starting from the right. When loop back mode is set, all bits will display
zero.
Source Address
P446SV-TM-EN-1
COL ROW DEFAULT SETTING
13 80 Latched
13 81 Set/Reset
13 84 Latched
13 85 Set/Reset
13 88 Latched
13 89 Set/Reset
13 8C Latched
13 8D Set/Reset
15 00
15 01 Data
15 02 Data
15 10 1
DESCRIPTION
SET/RESET
IN/OUT
ENABLED/DISABLED
[Indexed String]
Latched
Pulsed
[Indexed String]
ON/OFF
SET/RESET
IN/OUT
ENABLED/DISABLED
[Indexed String]
Latched
Pulsed
[Indexed String]
ON/OFF
SET/RESET
IN/OUT
ENABLED/DISABLED
[Indexed String]
Latched
Pulsed
[Indexed String]
ON/OFF
SET/RESET
IN/OUT
ENABLED/DISABLED
[Indexed String]
Latched
Pulsed
[Indexed String]
ON/OFF
SET/RESET
IN/OUT
ENABLED/DISABLED
[Indexed String]
IM Output Status
[Binary Flags (8 bits)]
IM Input Status
[Binary Flags (8 bits)]
From 0 to 10 in steps of 1
[Unsigned Integer(16 bit)]
Appendix B -Settings and Signals
AVAILABLE OPTIONS
B69