GE MiCOM P40 Technical Manual page 769

P446SV
MENU TEXT
if Enabled, allows reset of CB lockout state by selecting CB autoreclosing disabled
Res LO by ExtDDB
if Enabled, allows reset of CB lockout state by external DDB input
Res LO by TDelay
if Enabled, allows reset of CB lockout state after time LO Reset Time
LO Reset Time
CB lockout reset time if Res LO by TDelay is set to Enabled
DATE and TIME
This column contains Date and Time stamp settings
Date/Time
Displays the relay's current date and time.
Date/Time
Modbus only
Date
Displays the date. Front Panel Menu only
Time
Displays the time. Front Panel Menu only
Battery Status
Displays whether the battery is healthy or not
Battery Alarm
Setting that determines whether an unhealthy relay battery condition is alarmed or not
Primary Source
Sets the primary time synchronisation source
Secondary Source
Sets the secondary time synchronisation source
Domain Number
Assigns the PTP domain number. A domain is grouping of PTP clocks that synchronise to each other on a network.
This provides a way of implementing independent synchronisation of PTP clocks on a shared network
Act. Time Source
Displays the active time synchronisation source being used.
'Free Running' means the IED is not synchronised with any normal time-server, including IRIG-B, PTP or SNTP. The IED relies solely on its
internal clock.
IRIG-B Status
P446SV-TM-EN-1
COL ROW DEFAULT SETTING
07 9E Disabled
07 9F Disabled
07 A0 1
08 00
08 01
08 N/A
08 N/A
08 N/A
08 06
08 07 Enabled
08 08 PTP
08 09 None
08 0F 0
08 10
08 11
DESCRIPTION
[Indexed String]
Disabled
Enabled
[Indexed String]
Disabled
Enabled
[Indexed String]
From 1 to 9999 in steps of 1
[Courier Number (time-seconds)]
Dead
Healthy
[Indexed String]
Disabled
Enabled
[Indexed String]
IRIG-B
None
PTP
SNTP
[Indexed String]
IRIG-B
None
PTP
SNTP
[Indexed String]
From 0 to 127 in steps of 1
[Integers]
IRIG-B
None
PTP
SNTP
[Indexed String]
Card Not Fitted
Card Failed
Signal Healthy
No Signal
Appendix B -Settings and Signals
AVAILABLE OPTIONS
B23